AR3 Confirms 5km Rare Earths and Niobium Carbonatite System
Released
Released
Announcement PDF
ASX: AR3 | MARKET ANNOUNCEMENT ASX Release: 18 November
2026
AR3 Confirms 5km Rare Earths and Niobium
Carbonatite System at Overland
Highlights
• First assays from the recent drilling campaign at the 100%-owned Overland Project in
South Australia have returned significant rare earth element (REE) and niobium
intersections in drill holes OV175–OV179, being five of the eight holes completed.
• Emerging Carbonatite-Related System: Anomalous niobium and rare earth
mineralisationhas beenintersectedinwidelyspaceddrillholes spanningapproximately
5 km along a magnetic trend interpreted to be associated with a carbonatite system.
Geological and grade continuity between drill holes has not yet been established.
• Niobium mineralisation: Drilling has intersected broad zones of, carbonatite related,
elevated niobium (Nb₂O₅) mineralisation with rare earth enrichment including the
following intersections which ended in mineralistion and remain open at depth:
o OV176: 137 m @ 349 ppm Nb₂O₅ & 1271 ppm TREO from 64 m
o OV177: 43 m @ 632 ppm Nb₂O₅ & 3613 ppm TREO from 67 m
Incl. 5m @ 0.69% TREO from 101m
o OV179: 65 m @ 766 ppm Nb₂O₅ & 4587 ppm TREO from 79 m
Incl. 7m @ 0.73% TREO from 80m
• Results continue to demonstrate a strong correlation between mineralisation and the
extensive magnetic anomaly through the project area, which remains largely untested.
• Geological interpretation identifies a highly prospective and largely untested southern
magnetic target that may represent an extension of the mineralised carbonatite trend.
• Planning is underway for the next phase of drilling designed to test the large magnetic
anomaly south of the currently defined mineralised footprint.
• Assays for the remaining three holes are pending.
• Engage with this announcement via the Investor Hub
AR3 Managing Director and CEO, Travis Beinke said:
"These initial assay results provide another important step forward in understanding what
appears to be a significant carbonatite system at Overland.
The confirmation of anomalous rare earth and niobium mineralisation across approximately
five kilometres of strike materially expands the footprint of the discovery and reinforces our
confidence in the underlying geological model.
Particularly encouraging is the fact that several of the mineralised drill holes remain open at
depth, while geological interpretation continues to identify compelling targets along the
broader magnetic corridor.
The large southern magnetic anomaly is especially exciting. It remains essentially untested but
displays many of the characteristics we would expect to see if the system continues beyond the
area drilled to date.
Carbonatite systems globally host some of the world's largest rare earth and niobium deposits.
While these systems are often complex and require considerable work to fully understand, the
scale indicators we are seeing at Overland continue to highlight the significant exploration
opportunity before us.
With further assays pending and growing engagement from the geological and academic
community, we believe Overland has the potential to become an important new critical
minerals discovery in Australia."
Rare Earth and Niobium Mineralisation Extended Along Emerging
Carbonatite System
Australian Rare Earths Limited (ASX: AR3) (“AR3” or “the Company”) has received the first
assay results from recent drilling at its 100%-owned Overland Project in South Australia, where
exploration continues to delineate an extensive niobium–rare earth element (REE) mineralised
system exhibiting geological characteristics consistent with carbonatite-related
mineralisation.
Niobium and rare earth elements are both included on Australia’s Critical Minerals List.
Niobium is used predominantly in high-strength steel alloys, while certain rare earth elements
are essential inputs for the permanent magnets used in electric vehicles, wind turbines and
advanced electronics.
Carbonatites are rare in Australia but represent an important source of rare earth elements and
niobium globally. A recent review by Chandler et al. (2025)1
identified just 16 known carbonatite
occurrences across Australia, collectively associated with approximately 7.2 million tonnes of
contained rare earth oxides and 2.7 million tonnes of Nb₂O₅. In South Australia, confirmed
carbonatite occurrences are limited, with the Walloway Carbonatite near Orroroo comprising
relatively small dykes and intrusive bodies, although its broader extent remains poorly
understood. Carbonatite systems are commonly associated with alkaline magmatism, major
crustal structures and distinctive magnetic responses, highlighting the exploration significance
of the extensive niobium–rare earth mineralisation identified at Overland.
The latestassay results continue to strengthen AR3's interpretation thatOverland hosts a large-
scale niobium–rare earth mineralised system associated with an extensive magnetic corridor.
Assays received from drill holes OV175 to OV179 have confirmed anomalous rare earth and
niobium mineralisation across approximately five kilometres of strike length. Importantly,
1
Chandler, R., González-Álverez, I., Mavrogenes, J. and Blais, L. (2025). A review of Australian carbonatites and associated
REE-Nb mineralisation. Journal of Geochemical Exploration, 279, 107870. https://doi.org/10.1016/j.gexplo.2025.107870
mineralisation remains open both along strike and at depth, indicating significant scope for
further expansion.
These results representonlythe first five drill holes from the most recent campaign, with assays
for the remaining holes still pending.
The continuity of anomalous mineralisation over such a substantial distance is considered
particularly encouraging given the early stage of exploration and the limited drilling completed
to date.
Broad Mineralised Intersections Demonstrate Scale Potential
A key outcome of the drilling campaign has been the confirmation of broad zones of
carbonatite-style mineralisation, characterised by extensive alteration and elevated rare earth
and niobium concentrations. Notably, drill hole OV176 intersected over 130 metres of
anomalous rare earth and niobium mineralisation within highly altered rocks, with the hole
terminating in mineralisation (Figure 2).
Significant widths of anomalous niobium mineralisation have been intersected across all five
holes reported, accompanied by elevated rare earth concentrations (Table 1). Using a lower
cut-off grade of 50 ppm Nb₂O₅ and a minimum interval width greater than 1 m, notable
intersections include;
o OV176: 137m @ 349 ppm Nb₂O₅ & 1271 ppm TREO from 64m
o OV177: 43m @ 632 ppm Nb₂O₅ & 3613 ppm TREO from 67m
Incl. 5m @ 0.69% TREO from 101m
o OV179: 65m @ 766 ppm Nb₂O₅ & 4587 ppm TREO from 79m
Incl. 7m @ 0.73% TREO from 80m
These results highlight the substantial thickness and distribution of niobium mineralisation and
associated rare earth enrichment across the Overland system.
Table 1: Significant niobium (Nb₂O₅) intersections from drill holes OV175–OV179, reported using a lower cut-off
grade of 50 ppm Nb₂O₅ applied to each individual 1 m sample interval and a minimum reported intersection length
greater than 1 m. Corresponding TREO grades and selected rare earth element concentrations and distributions
are also presented. All reported intersections represent downhole lengths. The geometry and orientation of
mineralisation have not yet been adequately established, and true widths are unknown.
Hole ID
From
(m)
To
(m)
Width
(m)
Nb2O5
(ppm)
TREO
(ppm)
TREO-CeO
(ppm)
NdPr/TREO
(%)
Dy/TREO
(%)
OV175 57 75 18 180 895 532 20.9 1.4
OV176 64 201 137 349 1271 759 19.8 1.6
OV177 67 110 43 632 3613 2037 18.5 1.3
OV178 89 100 11 107 381 241 19.8 2.3
OV179 79 144 65 766 4587 2810 22.4 1.8
Figure 1: Discontinuous PCD core recovered from drill hole OV176 between approximately 150 m and 158 m,
displaying strongly altered, veined and brecciated lithologies. Laboratory assays of the corresponding nominal 1
m drill-cuttings samples returned an interval of 8 m @ 649 ppm Nb₂O₅ & 917 ppm TREO from 150 m. The
photographed core was retained for geological logging and was not the material used to generate the reported
assay results. Drilling was undertaken using aircore methods, with a PCD bit used in competent basement rocks.
Discontinuous core was retained for geological logging, while drill cuttings collected over nominal 1 m intervals
were submitted for laboratory assay. Reported intersections are based on drill cuttings, which may be subject to
some interval mixing or up-hole contamination during wet drilling. The extent of any sampling bias has not yet
been quantified, and further drilling is required to confirm mineralisation geometry, continuity and grade
distribution.
Figure 2: Geological cross-section through drill holes OV176–OV178 showing downhole gamma, TREO and Nb₂O₅
concentrations in relation to the underlying magnetic anomaly. Elevated niobium and rare earth concentrations
occur along the interpreted margins of the magnetic feature, demonstrating a strong spatial association between
mineralisation and the magnetic response. Mineralisation remains open at depth in holes OV176 and OV177.
The broad niobium and rare earth intersections in OV176 and OV177, hosted within strongly
altered basement rocks, highlight the potential for substantial downhole thicknesses of
mineralisation associated with the interpreted carbonatite-related magnetic system.
Further north along this interpreted magnetic trend, drill hole OV179 intersected similarly
elevated niobium and rare earth mineralisation (Figure 3). Together, these results confirm the
presence of anomalous mineralisation in widely spaced drill holes distributed over
approximately 5 km of the interpreted magnetic trend, with the system remaining open along
strike and at depth. Geological and grade continuity between the drill holes has not yet been
established.
Figure 3: Geological cross-section through drill holes OV179 and OV181 showing downhole gamma with TREO
and Nb₂O₅ Assays in relation to the underlying magnetic anomaly. Elevated rare earth and niobium concentrations
in OV179 are associated with the magnetic feature, with mineralisation remaining open at depth. Assay results for
OV181 are pending.
Southern Magnetic Target Emerging as Priority Exploration Area
This initial drilling campaign has materially improved AR3's understanding of the Overland
carbonatite system and its relationship to the regional magnetic signature.
Results continue to support the Company's view that magnetics provide an effective
exploration tool for identifying potentially fertile carbonatite intrusions within the broader
project area.
Of particular significance is the large untested magnetic anomaly south of the currently drilled
area. Geological interpretation suggests this target may represent a continuation or extension
of the mineralised system.
The southern target remains essentially untested and will become a major focus of future
exploration.
Figure 4: Total Magnetic Intensity (TMI) image of the Overland Project showing the location of recent drill holes,
with assay results received (green) and assays pending (white). The drilling has targeted magnetic anomalies along
the Regional Palmer Fault, including a series of discrete magnetic highs to the north. A large, high-intensity
magnetic feature, extending approximately 4 km along strike, is evident to the south of the current drilling area and
represents a significant exploration target for future investigation.
A Unique Discovery in Covered Terrain
As previously reported by AR3, Overland represents a highly unusual geological occurrence.
The discovery comprises rare earth and niobium mineralisation associated with interpreted
mantle-tapping structures developed within a shallow covered setting beneath the Murray
Basin. The geological setting and anomalous rare earth and niobium mineralisation display
characteristics similar to those of global and Australian carbonatite occurrences and continue
to attract interest from government geoscientists, academic institutions and specialist
carbonatite researchers.
While the discovery demonstrates many features considered prospective for critical mineral
mineralisation, carbonatite systems are inherently complex and require systematic geological,
geochemicalandmineralogicalevaluation tounderstandtheir fertility, geometry andeconomic
significance.
As a consequence, AR3 continues to adopt a disciplined exploration approach focused on
understanding both the scale and mineralogical characteristics of the system before assessing
its broader economic potential.
Next Steps
• Receipt of outstanding assay results from the recent drilling campaign.
• Integration of geological, geochemical, geophysical and mineralogical datasets.
• Continued engagement with government geologists, carbonatite specialists and
academic researchers to further refine geological models.
• Detailed targeting studies over the southern magnetic anomaly.
• Design and permitting of a follow-up drilling campaign to test the interpreted southern
extension of the system.
• Ongoing assessment of the fertility, mineralogy and critical minerals potential of the
broader Overland carbonatite complex.
This announcement has been authorised for release by the Board of Australian Rare Earths Limited.
For further information please contact:
Australian Rare Earths Limited IR & Media Enquiries
Travis Beinke Jessica Fertig
Managing Director and CEO Tau Media
T: 1 300 646 100 E: jessica@taumedia.com.au
Engage and Contribute at the AR3 investor hub: https://investorhub.ar3.com.au/
Competent Person's Statement
The information in this report that relates to Exploration Results is based on, and fairly represents, information and
supporting documentation compiled by Mr Chris Cockburn, who is a Member of the Australian Institute of
Geoscientists (AIG). Mr Cockburn is an employee of Australian Rare Earths Limited and has sufficient experience
that is relevant to the style of mineralisation and type of deposit under consideration and to the activity being
undertaken to qualify as a Competent Person as defined in the 2012 Edition of the Australasian Code for Reporting
of Exploration Results, Mineral Resources and Ore Reserves (JORC Code). Mr Cockburn consents to the inclusion
in this report of the matters based on his information in the form and context in which they appear.
About Australian Rare Earths Limited
Australian Rare Earths (AR3) is a diversified critical minerals company, strategically positioned to meet the growing
global demand for uranium and rare earth elements:
• AR3's Koppamurra Rare Earths Project in South Australia and Victoria is a significant deposit of light and
heavy rare earths, now underpinned by a Pre-Feasibility Study and maiden Ore Reserve, and supported by
the Australian Government through a $5 million grant to accelerate development. AR3 is progressing
toward a Definitive Feasibility Study and pilot-scale demonstration production at ANSTO's Sydney facility,
solidifying its role as a potential new source of new supply to diversify global rare earth feedstocks for the
clean energy transition.
• AR3's large ~8,000 km² Overland Uranium Project in South Australia shows strong uranium discovery
potential, with drilling also identifying a new niobium–rare earth carbonatite exploration target.
With strategic projects as well as strong government support, AR3 is well placed to capitalise on significant growth
in the critical minerals market.
Hole ID East (m) North (m) SRTM RL (m ASL) Drill Method Down Hole Width (mm) Total Depth EOH (m) Azimuth Dip Direction
OV175 340578 6174703 141 Aircore 76 75 0 -90
OV176 340496 6173552 145 Aircore 76 201 0 -90
OV177 340425 6173532 147 Aircore 76 110 0 -90
OV178 340334 6173538 149 Aircore 76 111 0 -90
OV179 340541 6177647 138 Aircore 76 144 0 -90
OV180 340657 6178434 136 Aircore 76 156 0 -90
OV181 340639 6177634 137 Aircore 76 150 0 -90
OV182 350245 6177428 75 Aircore 76 67 0 -90
Appendix 1 - List of Collars
OV175 57 75 18 180 895 532 20.9 1.4
OV176 64 201 137 349 1271 759 19.8 1.6
OV177 67 110 43 632 3613 2037 18.5 1.3
OV178 80 81 1 72 184 130 17.5 3.7
OV178 84 85 1 157 638 449 13.6 4.0
OV178 86 87 1 50 301 183 17.8 1.7
OV178 89 100 11 107 381 241 19.8 2.3
OV178 110 111 1 64 328 207 19.7 2.5
OV179 79 144 65 766 4587 2810 22.4 1.8
TREO-CeO
(ppm)
(NdPr)/TREO
(%)
Dy/TREO
(%)
Hole ID
From
(m)
To
(m)
Width
(m)
Nb2O5
(ppm)
TREO
(ppm)
Appendix 2- Significant Niobium Intersections (>50ppm Nb2O5 and minimum interval length >1m)
with Corresponding TREO Grades
Appendix 3 - JORC Table 1
Section 1 Sampling Techniques and Data
Criteria Explanation Comment
Sampling
techniques
Nature and quality of sampling
(e.g., cut channels, random chips,
or specific specialised industry
standard measurement tools
appropriate to the minerals under
investigation, such as down hole
gamma sondes,or handheld XRF
instruments, etc). These examples
should not be taken as limiting
the broad meaning of sampling.
Include reference to measures
taken to ensure sample
representivity and the
appropriatecalibration of any
measurement tools or systems
used. Aspects of the
determination of
mineralisation that are
Material to the Public Report.
In cases where
‘industry standard’ work has been
done this would be relatively
simple (e.g., ‘reverse circulation
drilling was used to obtain 1 m
samples from which 3 kg was
pulverised to produce a 30 g
charge for fire assay’). In other
cases, more explanation may be
required, such as where there is
coarse gold that has inherent
sampling problems. Unusual
commodities or mineralisation
types (e.g., submarine nodules)
may warrant disclosure
of detailed information.
Aircore drilling methods were used to obtain samples from the
April/May 2026 drilling program and during the
August/September 2026 drilling program centered on the town
of Sedan.
The following information covers the sampling process:
All air core samples were collected from the rotary splitter
mounted at the bottom of the cyclone using a pre-numbered
calico bag. The samples were geologically logged at 1 m
intervals using the marked calico sample which averaged ~1.5
kg in mass.
A handheld Olympus Vanta pXRF Analyser (Model Vanta M
Series S/N 842924) was used to assess the geochemistry of the
Air Core samples in the field. The pXRF analysis provided
screening analysis to characterize the sample lithology and full
suite of elements.
The pXRF sampling was analysed through the calico bag with a
beam count time of 20-30 sec beam 1 and 10 sec beam 2. One
pXRF analysis per sample was performed.
Samples are placed on a workbench and flattened to provide a
stable, representative surface for analysis. The pXRF is
positioned directly against the sample surface with the beam
oriented downward during measurement.
All readings were taken at ambient temperatures between 10
and 45 degrees Celsius. The Olympus Vanta is rated for
continuous operation within these temperatures.
Samples range from dry to wet, this is dependent on which
formation is being intercepted and whether drilling water has
been injected.
XRF readings were downloaded from the XRF Analyser at
the end of each day and uploaded to the Australian Rare
Earths Azure Data Studio database.
A REE standard Oreas461 (1.06% TREO, 1854ppm Nb2O5,
sourced from both a quarry north of Melbourne (weathered
barren siltstone) and Lynas Corporation’s Mount Weld
Project (the ‘Central Lanthanide Deposit’) was used to verify
the accuracy of the pXRF before and after each analysis
session.
The OREAS461 standard was prepared using an industry
standard pXRF sample cup and analysed for 20-30 sec on
beam 1 and 10 Sec on beam 2.
A Uranium standard Oreas 121 (215 ppm U, sourced from
Mantra Resources Nyota Prospect, Tanzania, which is a
Tabular Sandstone hosted deposit) was used to verify the
accuracy of the pXRF before and after each analysis session.
The OREAS 121 standard was prepared using an industry
standard pXRF sample cup and analysed for 20-30 sec on
beam 1 and 10 Sec on beam 2.
Au standard OREAS 523b (1.05g/t Au) was prepared from a
blend of iron oxide copper-gold (IOCG) ore, barren
rhyodacite and iron oxide ore. The IOCG ore was sourced
from the Ernest Henry Mine.
A silica blank is used to monitor the accumulation of
contamination on the lens of the pXRF. Analysis of the blank
is undertaken before and after each analysis session.
Review of pXRF standard and blank data is checked to
ensure the pXRF is operating correctly before and after
each session.
Samples were selected for assay at the end of the hole
based on geology, pXRF, and natural downhole gamma
response.
Field duplicates were taken at a rate of ~1:40 and inserted
blindly into the sample batches.
Field Standards were taken at a rate of ~1:40 and inserted
blindly into the samples batches.
Samples were submitted to Bureau Veritas in Adelaide,
where wet and dry sample weights were recorded before
oven drying at 105 degrees Celsius for a minimum of 24
hours. Samples were then secondary crushed to 3 mm and
pulverised to 90% passing 75 µm, with excess residue
retained for storage and selected material submitted for
analysis using the XRF-ICP-MS method.
The samples were submitted for analysis using Mixed Acid
Digest – Lithium Borate Fusion ICP‐MS method (BV Code
SC302) with detection limits for each element shown in ppm
Ag (0.2 ppm), Al (50.0 ppm), As (1.0 ppm), Au (0.01 ppm),
Ba (2.0 ppm), Be (0.5 ppm), Bi (0.1 ppm), Ca (100.0 ppm),
Cd (0.5 ppm), Ce (0.1 ppm), Co (1.0 ppm), Cr (20.0 ppm), Cs
(0.1 ppm), Cu (1.0 ppm), Dy (0.05 ppm), Er (0.05 ppm), Eu
(0.05 ppm), Fe (100.0 ppm), Ga (0.2 ppm), Gd (0.2 ppm), Hf
(1.0 ppm), Ho (0.02 ppm), In (0.05 ppm), K (100.0 ppm), La
(0.1 ppm), Li (10.0 ppm), Lu (0.02 ppm), Mg (50.0 ppm), Mn
(50.0 ppm), Mo (0.5 ppm), Na (100.0 ppm), Nb (0.5 ppm),
Nd (0.05 ppm), Ni (2.0 ppm), P (50.0 ppm), Pb (1.0 ppm), Pr
(0.05 ppm), Rb (0.2 ppm), Re (0.1 ppm), S (50.0 ppm), Sb
(0.1 ppm), Sc (1.0 ppm), Se (5.0 ppm), Si (50.0 ppm), Sm
(0.05 ppm), Sn (0.1 ppm), Sr (0.5 ppm), Ta (0.1 ppm), Tb
(0.02 ppm), Te (0.2 ppm), Th (0.1 ppm), Ti (50.0 ppm), Tl
(0.1 ppm), Tm (0.05 ppm), U (0.1 ppm), V (20.0 ppm), W
(0.5 ppm), Y (1.0 ppm), Yb (0.05 ppm), Zn (2.0 ppm), Zr
(10.0 ppm)
Select samples, often at the bottom of the holes
thought to be weathered basement/saprolite material
were also analysed for gold, platinum and palladium
using Lead collection Fire Assay – ICP-AES (BV Code
FA002) where a detection limits are (Au (1) Pt, Pd (5)
ppb)
All samples were submitted for Loss on ignition, (BV
code TG001) where a detection limit is LOI (0.01%)
Laboratory repeat analyses were completed at an
approximate frequency of 1 in 16 samples.
Commercially sourced certified reference materials were
inserted by the laboratory into the sample sequence at an
approximate frequency of 1 in 5 samples.
Laboratory blanks were inserted into the sample sequence
at an approximate frequency of 1 in 50 samples.
After the hole was drilled to completion a Reflex EZ Gamma
logging tool was used to survey the hole.
For the April/May program reflex Ez-Gamma (serial number
GAM‐105) rented from Imdex and operated by the drilling
crew was run down the hole, inside the rods/innertube to log
the natural gamma response of the sediments. The gamma
tool was last calibrated by Imdex on February 19th, 2026, as
noted in the provided Certificate of Conformance. Confidence
check jig serial number 030.
For the August/Sept program reflex Ez-Gamma (serial
number GAM‐005) rented from Imdex, and operated by the
drilling crew was run down the hole, inside the
rods/innertube to log the natural gamma response of the
sediments. The gamma tool was last calibrated by Imdex on
April 8th, 2026, as noted in the provided Certificate of
Conformance. Confidence check jig serial number 001.
The survey was run in and out of the hole at a speed of no
more than 10m/min and the downhole speed was reviewed
after the survey.
The up (out) survey was then used to plot sections, after
reviewing both in and out surveys.
In previous drilling at Overland, the Reflex EZ-Gamma logging
tool was checked with an EZ-Gamma Confidence Checker by
AR3 staff before each downhole gamma survey to verify
instrument performance. Based on the demonstrated
reliability and consistency of the EZ-Gamma tool during
previous programs, it was determined that routine confidence
checks were not necessary for this drilling campaign. Instead,
the repeatability of the gamma data was assessed by
comparing the downhole (in-run) and uphole (out-run)
surveys.
After completion of each gamma survey, the in-run and out-
run datasets were reviewed and compared to confirm data
repeatability and identify any significant discrepancies that
could indicate instrument drift or logging issues. Any
inconsistencies would have triggered further investigation
and, if required, a repeat survey.
After the gamma survey is completed, the data is uploaded to
the Imdex hub IQ portal (https://iq.imdexhub.com) from the
rig via satellite internet and available for review.
Aircore drilling with Polycrystalline diamond (PCD) bit
A polycrystalline diamond (PCD) drill bit was used to
penetrate competent rock beneath the unconsolidated
sedimentary cover. During PCD drilling, discontinuous core
pieces of variable length, commonly approximately 5–20 cm
and approximately 34–35 mm in diameter, were recovered
through the inner tube and placed into core trays for
geological logging and subsequent sampling. The PCD drilling
process also generated drill cuttings, which were collected
separately over 1 m intervals.
Drill cuttings generated during PCD drilling were returned via
the cyclone and collected in a bucket over each 1 m drilled
interval. At the completion of each metre, the bucket was
removed and excess water decanted before the remaining
cuttings were transferred to a labelled calico bag. This
process was intended to provide a composite sample
representative of the material returned from each 1 m drilled
interval.
Discontinuous PCD core pieces were also recovered through
the inner tube and retained in core trays, providing
complementary geological material from the corresponding
drilled intervals.
Due to the wet drilling and sample-return process, some
mixing and/or contamination between intervals may occur.
Groundwater and loose sediment or drill material from higher
in the hole may migrate downhole as drilling progresses and
subsequently be incorporated into the returned cuttings.
Accordingly, the 1 m cuttings samples may contain a degree
of up-hole contamination and should not be considered
equivalent to intact, continuously recovered drill core.
The following holes and intervals are where core was retrieved
OV175 62.5m – 75m, OV176 72m-201m, OV177 75m-110m,
OV178 74m-111m.
Drilling
techniques
Drill type (e.g., core, reverse
circulation, open- hole hammer,
rotary air blast, auger, Bangka,
sonic, etc) and details (e.g., core
diameter, triple or standard tube,
depth of diamond tails, face-
sampling bit, or other type,
whether core is oriented and if so,
by what method, etc).
Drilling was completed using a Wallis “Mantis 100/200” air core
drill rig for the drilling.
Aircore drilling is a form of reverse circulation drilling where the
sample is collected at the face and returned inside the inner
tube. The drill cuttings are removed by injection of compressed
air into the hole via the annular area between the inner tube
and the drill rod.
Aircore drill rods used were 3 m long.
NQ diameter (76 mm) drill bits and rods were used.
The intervals of cored material provided a core diameter between
~34-35mm diameter.
All aircore drill holes were vertical with depths varying between
27- 201m depth.
Drill sample
recovery
Method of recording and
assessing core and chip sample
recoveries and results assessed.
Measures taken to maximise
sample recovery and ensure
representative nature of the
samples.
Whether a relationship exists
between sample recovery and
grade and whether sample bias
may have occurred due to
preferential loss/gain of
fine/coarse material.
Drill sample recovery for aircore is monitored by recording
sample condition descriptions where ‘Poor’ to ‘Very Poor’
were used to identify any samples recovered which were
potentially not representative of the interval drilled.
A comment was included where water injection was required
to recover the sample from a particular interval. The use of
water injection can potentially bias a sample and very little
water injection was required during this drilling program.
No significant loses of samples were observed due to the
shallow drilling depths.
Drilling commonly advanced from unconsolidated Murray
Basin sediments into saprolitic bedrock, with sample quality
varying in basement zones where interpreted faults were
intersected. These zones were logged at one-metre intervals
and assigned a sample quality attribute.
The rotary splitter was set to an approximate 20% split,
which produced approximately 1.5 kg sample for each
meter interval.
The 1.5 kg sample was collected in a pre- numbered calico
bags and the remaining 80% (5 kg to 8 kg) was disposed of
in a sump below the cyclone/rotary splitter.
At the end of each drill rod, the drill string is cleaned by
blowing down with air to remove any clay and silt
potentially built up in the sample pipes and cyclone.
No relationship has been identified between sample
recovery and grade at this early stage of exploration.
Aircore with Polycrystalline diamond (PCD) bit
Due to the wet drilling and sample-return process, some
mixing and/or contamination between intervals may
occur. Groundwater and loose sediment or drill material
from higher in the hole may migrate downhole during
drilling and subsequently be incorporated into the
returned cuttings. The 1 m cuttings samples may therefore
contain a degree of up-hole contamination. No
relationship between sample recovery and grade has been
established. The pote
Share your feedback
Discover